This smart hardwire display kit is a 9.8-foot cable to make your life easier when hardwiring your dash cam to your car with the LCD display of the voltage and voltage settings. This kit will prevent the battery from being depleted when the dash cam is hardwired into the car.
Easily view voltage and voltage settings.
|COMPATIBLE WITH MANY CARS
This can be installed in a compact car ranging to a large commercial vehicle.
|Safety Circuit Protection
Short Circuit/ Over Current/ Over Temperature/ Reverse Connection Protection.
|DELAY LOW VOLTAGE PROTECTION
If low voltage is detected and exceeds 6 minutes lower than set gear, power will immediately be cut off to save the battery.
G-sensor is built into the dash cam, so if it senses drastic breaking or a collision, it will automatically lock onto the emergency files. This ensures that these files will not be loop recorded once they have been locked.
|Compatible with myGEKOgear Dash Cams
Orbit 110, Orbit 120, Orbit 130, Orbit 510, Orbit 530, Orbit 550, Orbit 930, Orbit 950, Orbit 960, E100, P500, and OwlScout.
|Connector||Mini & Micro USB|
|Voltage Protection||11.6/ 11.7/ 11.8 / 11.9/ 12/ 12.1 12.2v/
23.2/ 23.4/ 23.6/ 23.8/ 24/ 24.2/ 24.4v
|Time Protection||2/ 4/ 8/ 12/ 24/ 26 Hours HHH (Always On)|
|Cable Length||9.84 ft|
|Unit Weight||0.22 lbs|
|Unit Dimensions||2.8″ x 1.6″ x 0.7″|
|Item||Product Description||UPC||Package Dim.||Package Weight||Master Carton Qty|
|Smart Hardwire Kit||Smart Hardwire Kit with a Display||850006713189||3.4″ x 1.4″ x 6″ Inch||0.38 lbs||100|